2024 Bush Hog® DSP Series DSP12

Information

2024 Bush Hog® DSP Series DSP12

Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides.

Features may include:

  • Available in 8-foot, 10-foot, and 12-foot widths
  • DSP scrapers are designed for 70 to 125 horsepower tractors
  • Replaceable wear plates on the sides.

Photos

Highlights

  • Kearney, Missouri
  • 2024
  • Bush Hog®
  • DSP Series DSP12
  • Available

Specifications

  • 2024
  • Bush Hog®
  • DSP Series
  • DSP12
  • Box Blades/Scrapers
  • Horsepower Rating: 70 To 125
  • New 9.5L X 15 8 Ply Rib Tl On Rim 5 With 5.5 Bhc
  • Maximum Transport Speed: 20 Mph
  • Moldboard Construction: 1/4-Inch X 24 1/4-Inches High When Formed | Side Plate Construction: 3/8×24 5/16-Inches High X 39 3/4Inches Deep | Tongue Construction: 4×4-Inches X 1/4-Inch Tubing \ Dump Clearance: 21-Inches | Maximum Tilt Depth To The Right: 8 1/4-Inches | Maximum Tilt Angle: 3 1/2°
  • 144 3/16-Inches
  • 144 3/16-Inches
  • Of Box: 39-Inches | Cutting: 5-Inches Below Grade
  • 1/2-Inch X 6-Inches Reversible & Replaceable | Reinforcement: 3-Inches X 3-Inches X 5/16-Inch Angle Plus A 1/4-Inch Mold Board = 9/16-Inch At The Cutting Edge
  • 3 1/2-Inches X 8-Inches Asae | Tilt: 3 1/2-Inches X 8-Inches Asae
  • 2 3/4 Cu. Yds.
  • Tilt Axle: 1700-Lb | No Tilt Axle: 1525-Lb | Of Material In Box: 760-Lb